DOOR MAINTENANCE AND REPAIR KIT (Fire Doors and NonRated Doors)

DOOR MAINTENANCE AND REPAIR KIT (Fire Doors and NonRated Doors)

Sometimes you don't know what you need until you need it... That’s why we’ve got it !!! You NEVER know what you’re gonna run into when it comes to door and hardware maintenance and repairs. Might see Broken off or Stripped out screws that need to...

Fire Rated Wood SHIMZ (Qty=24)

Fire Rated Wood SHIMZ (Qty=24)

Fire Retardant Wood Shims for Fire Rated Openings. Primarily Used to shim Windows and Doors FRAMES Qty = 24

READY TO HANG: FIELD GUIDE

READY TO HANG: FIELD GUIDE

READY TO HANG is a Field Guide for Basic Organization and Installation of Commercial Doors and Hardware. If you're somewhere in the loop of getting commercial doors and hardware INSTALLED then this Guide is for YOU. No FluFF !

READY- SHIMS for FIRE-RATED Doors WITH DOOR GAP GAUGE

READY- SHIMS for FIRE-RATED Doors WITH DOOR GAP GAUGE

50 shims & a Door Gap Gauge...THESE 16 GAUGE PEEL AND STICK SHIMS ARE FOR FIRE-RATED DOORS. NFPA 80 requires the use of steel shims when shimming Fire rated Doors. ONLY 1/16TH INCH THICK , 3/16 INCH WIDE AND 3.25 INCHES LONG. Just Peel and Stick !! DOOR GAP GAUGE INCLUDED !!

THE DOOR GAP GAUGE

THE DOOR GAP GAUGE

The ONLY Gauge you will need to check Fire Door Assembly clearance requirements set forth by NFPA 80 !

READY-SHIMS FOR NON-RATED DOORS

READY-SHIMS FOR NON-RATED DOORS

STOP using trash to shim doors and finish the job like a PRO instead. READY SHIMS are REMOVABLE, RESTICKABLE and STACKABLE.Place them behind the hinge to push door towards the strike or to pull away from strike.You'll Shim doors in less than a...

50/50 Ready Shim COMBO

60 Steel Fire Rated Shims and 40 Non Rated Shims

SAVE A FEW BUCKS !! HERE'S A SPECIAL COMBO OF 100 READY SHIMS FOR RATED AND NON-FIRE RATED DOORS. They're an E-Z FIX FOR SAGGING DOORS OR DOORS THAT FIT TOO TIGHT IN THE FRAME . YOU GET 50 PEEL AND STICK SHIMS FOR NON RATED DOORS AND 50 PEEL AND...

READY- SHIMS for FIRE-RATED Doors

READY- SHIMS for FIRE-RATED Doors

Did you know that THE NATIONAL FIRE PROTECTION AGENCY sets standards for the installation and maintenance of Fire-Rated Door Assemblies. According to NFPA 80, section 6.4.3.4, steel shims are the ONLY acceptable shim to be used when shimming...