IMPACT SOCKET FOR FD200 FRAME DIMPLER

IMPACT SOCKET  FOR FD200 FRAME DIMPLER

NEED A 1/2" IMPACT SOCKET FOR FD200 FRAME DIMPLER ? GET IT HERE. THIS SOCKET WILL FIT YOUR 3/8" RATCHET OR IMPACT DRILL . IF YOU NEED SCREWS AND LUBRICANT TOO JUST GET THE UPGRADE KIT FOR $35.

#1, #2 & #3 INSERT TIPS W/STAINLESS STEEL MAGNETIC HOLDERS

#1, #2 & #3 INSERT TIPS W/STAINLESS STEEL MAGNETIC HOLDERS

GOTTA have the RIGHT tips for the JOB !! GET (10) ONE INCH #1 PHILLIPS INSERT TIPS , (10) ONE INCH #2TIPS AND (20) ONE INCH #3TIPS WITH (3) MAGNETIC STAINLESS STEEL HOLDERS TOO !! These are the REAL DEAL.. Hugs the screw head NICE n TIGHT !! YES.. THE HOLDERS ARE STAINLESS STEEL AND MAGNETIC

#1, #2 & #3 PHILLIPS TIPS (2" AND 3" SETS)

#1, #2 & #3 PHILLIPS TIPS (2" AND 3" SETS)

GOTTA have the RIGHT tips for the JOB !! GET (10) ONE INCH #1 PHILLIPS INSERT TIPS , (10) ONE INCH #2TIPS AND (20) ONE INCH #3TIPS WITH (3) MAGNETIC STAINLESS STEEL HOLDERS TOO !! These are the REAL DEAL.. Hugs the screw head NICE n TIGHT !! YES.. THE HOLDERS ARE STAINLESS STEEL AND MAGNETIC

#12 HINGE SCREW COMBO KIT (SAVE $$$)

#12 HINGE SCREW COMBO KIT (SAVE $$$)

#12 HINGE SCREW COMBO KIT IS FILLED WITH ALL THOSE HARD-2-FIND HINGE SCREWS NEEDED TO REPAIR AND MAINTAIN COMMERCIAL DOORS... INCLUDED ARE #12 HINGE SCREWS AND SELF DRILLING SCREWS FOR METAL DOORS AND FRAMES AS WELL AS #12 HINGE SCREWS FOR WOOD...

CLOSER ARM SUPPORT PLATE

CLOSER ARM SUPPORT PLATE

Ever tried to Attach a Closer Arm to a thin Metal Frame that has NO Reinforcement inside ? The Closer arm cannot attach securely and will pull away from the frame. When there is NO re-inforcement INSIDE the FRAME , support has to come from the...

DOOR MAINTENANCE AND REPAIR KIT (Fire Doors and NonRated Doors)

DOOR MAINTENANCE AND REPAIR KIT (Fire Doors and NonRated Doors)

Sometimes you don't know what you need until you need it... That’s why we’ve got it !!! You NEVER know what you’re gonna run into when it comes to door and hardware maintenance and repairs. Might see Broken off or Stripped out screws that need to...

DRILLERZ-N-TAPPERZ KIT

DRILLERZ-N-TAPPERZ KIT

Tried of RUINING Drill BITS when Attaching CLOSER ARMS or CONTINUOUS HINGES to Metal Frames Filled with Grout ? Here's a Specialty KIT to save you TIME and MONEY. Like having 100 Disposable Drill Bits and Taps !!

FD200 FRAME DIMPLER SCREWS (SET OF 2)

FD200 FRAME DIMPLER SCREWS (SET OF 2)

NEED EXTRA SCREWS FOR YOUR FD200 FRAME DIMPLER ? GET THEM HERE. SOLD IN SETS OF 2. IF YOU NEED A SOCKET AND LUBRICANT TOO JUST GET THE UPGRADE KIT FOR $35.

HINGE, STRIKE & LATCH REPAIR KIT

HINGE, STRIKE & LATCH REPAIR KIT

For WALLOWED or STRIPPED OUT LATCHES on HOLLOW METAL DOORS. Simply Place CLIPZ in position on LATCH then Install Lock. Clipz gives the screw Something to hold on to. They work PERFECT !! Use PLUGZ to FILL holes that have been WALLOWED out or NOT...

MORTISE CYLINDER TAP & DIE SET

MORTISE CYLINDER TAP & DIE SET

MORTISE LOCK CASE HAS STRIPPED OUT CYLINDER THREADS ??? When mortise cylinders and lock cases are new they screw together without a problem. Often times a mortise cylinder is forced out of a lock without loosening the retaining screw. Other times...

MORTISE CYLINDER TAP ONLY

MORTISE CYLINDER TAP ONLY

MORTISE LOCK CASE HAS STRIPPED OUT CYLINDER THREADS ??? When mortise cylinders and lock cases are new they screw together without a problem. Often times a mortise cylinder is forced out of a lock without loosening the retaining screw. Other times...

NORSEMAN SCREW/BOLT EXTRACTOR (10 PIECE SET)

NORSEMAN SCREW/BOLT EXTRACTOR (10 PIECE SET)

USA MADE ......Left Hand Spiral Drill Screw and Bolt Extraction Set Door & Hardware Installers, Locksmiths and Facilities Maintenance guys need THIS bolt extractor set! Made in the USA by Norseman CTD (Viking), this 10 Piece Bolt Extractor Left...

PHILLIPS INSERT BITS

PHILLIPS INSERT BITS

GET #1 #2 OR #3 PHILLIPS INSERT BITS AND TIPS. 1-INCH , 2-INCH OR 3-INCH LENGTHS AVAILABLE !! THEY ARE VERY GOOD TIPS THAT WILL HUG THE SCREW NICE AND TIGHT !!

Stainless Steel DRILLING KIT.....INCLUDES 9 BITS !!

Stainless Steel DRILLING KIT.....INCLUDES 9 BITS !!

Drilling thru Stainless Steel wiLL GIVE you FITS ... ... unless... you have the RIGHT BITS...... !!! Our Stainless STeeL Drilling KIT will HELP YOU get the job done. Kit Includes Everything you need to drill up to 1/4" diameter hole thru...

3/8" Paddle Bits QTY=6 for $10

3/8" Paddle Bits QTY=6 for $10

3/8 " Paddle Bit for Installing MOST door closers on wood doors.

Replacement Bits for Kwik Drill (Qty=4)

Replacement Bits for Kwik Drill (Qty=4)

Set of (4) Replacement Drill Bits for your Kwik Drill

SILENCERS FOR METAL FRAMES (QTY = 50)

SILENCERS FOR METAL FRAMES (QTY = 50)

RUBBER DOOR SILENCERS FOR METAL FRAMES. QTY = 50

STAINLESS STEEL INSERT TIP HOLDER (QTY=5)

STAINLESS STEEL INSERT TIP HOLDER (QTY=5)

3-INCH LONG STAINLESS STEEL INSERT TIP HOLDERS QTY = 5

VIX BITS

VIX BITS

Pre-drill PERFECT pilot holes for hinges to receive the #12 wood screw in commercial doors. Did you know, in most cases, the door manufacturers' warranty is VOIDED if pilot holes for hinge screws are not drilled prior to installing hinges ?

#12 Vix Bit Replacement Drill Guide

#12 Vix Bit Replacement Drill Guide

This is the replacement drill guide for the #12 Vix Bit by S.E Vick Tool Company.

#12 Vix Bit Replacement H.S.Drill Bits (QTY: 2)

#12 Vix Bit Replacement H.S.Drill Bits (QTY: 2)

This is the replacement drill bit for the #12 Vix Bit by S.E Vick Tool Company. YOU ARE GETTING TWO (2) of them !!

#12 Vix Bit Replacement Spring

#12 Vix Bit Replacement Spring

This is the replacement spring for the #12 Vix Bit by S.E Vick Tool Company.

#12 Vix Bit Replacement Washer

#12 Vix Bit Replacement Washer

This is the replacement washer for the #12 Vix Bit by S.E Vick Tool Company.

#3 Phillips Insert Bit Qty=20 ..Stainless Steel Holder Too !

#3 Phillips Insert Bit Qty=20 ..Stainless Steel Holder Too !

They're ON SALE !! That's right......This is (20) 1" #3 Philllips insert bit and (1) Stainless Steel Holder. MADE IN THE USA ! WOW !!

DRILL & TAPS

DRILL & TAPS

YOU GET (2) SETS OF DRILL & TAPS. THAT'S (2) TAPS AND (2) DRILL BITS AVAILABLE SIZES: 1/4-20 Tap WITH 13/64 H.S. DRILL 10-24 TAP WITH 5/32 H.S. DRILL 10-32 TAP WITH 5/32 H.S.DRILL 12-24 TAP WITH 11/64 H.S. DRILL 5/16-18 TAP WITH "G" H.S. DRILL